Discounts on SMARC® & COM HPC® Development Kits
Excellent CPU Platforms
Embedded Computing Expertise
System Integration Services
Premium Support
Product information "4X4-V2000M"
ASROCK Industrial 4X4-V2000M - 4X4 Single-Board-Computer 4X4 Motherboard - AMD Ryzen™ Embedded V2718
ASROCK Industrial 4X4-V2000M - 4X4 Single-Board-Computer
4X4 Motherboard - AMD Ryzen™ Embedded V2718

Overview
Key Features
  • AMD Ryzen™ Embedded V2718
  • 2 x 260-pin non-ECC/ECC SO-DIMM DDR4 3200 MHz , up to 64GB (32GB per DIMM)
  • 4 x USB 3.2 Gen2, 4 x USB 2.0, 1 x M.2 Key M, 1 x M.2 Key E, 1 x COM, 1 x SATA3
  • 1 x Realtek 1 Gigabit LAN, 1 x Realtek 2.5 Gigabit LAN
  • Supports Quad display, 1 x HDMI 2.0a, 3 x DP 1.2a (2 from Type C)
  • TPM 2.0 onboard IC
  • 12V~19V DC-In
Specification

Processor System

CPU V2718, 8C, Max Speed up to 4.15GHz
Chipset SoC
BIOS AMI SPI 128 Mbit

Form Factor

Dimensions 4X4 (4.09-in x 4.02-in x 1.4-in, 10.4 cm x 10.2 cm x 3.6 cm)

Memory

Technology Dual Channel non-ECC/ECC DDR4 3200 MHz
Capacity 64GB (32 GB per DIMM)
Socket 2 x 260-pin SO-DIMM

Graphics

Controller AMD Radeon™ Graphics
HDMI HDMI 2.0a
Max resolution up to 4096x2160@60Hz
DisplayPort DisplayPort 1.2a, DP++
Max resolution up to 4096x2160@60Hz
MultiDisplay Max 4 display (Included 2 outputs from Type C)

Expansion Slot

M.2 1 x M.2 (Key E, 2230) with PCIe x1, USB 2.0 for Wireless

Audio

Interface Realtek ALC233, High Definition Audio.

Ethernet

Controller/ Speed LAN1: Realtek RTL8125BG with 10/100/1000/2500 Mbps
LAN1: Realtek R8111EPV with 10/100/1000 Mbps, support DASH function
Connector 2 x RJ-45

Front I/O

USB 2 x USB 3.2 Gen2 (Type A)
2 x USB 3.2 Gen2 (Type C, Supports DP1.2a display output)
Audio 1 (headphone & microphone jack)

Rear I/O

HDMI 1 x HDMI 2.0a
DisplayPort 1 x DP 1.2a
Ethernet 1 x 1 Gigabit LAN, 1 x 2.5 Gigabit LAN
USB 2 x USB 2.0
DC Jack 1

Internal Connector

USB 2 x USB 2.0 (1 x 2.54 pitch header)
COM 1 x COM (RS-232/422/485)
TPM TPM 2.0 onboard IC

Storage

M.2 1 x M.2 (KEY M, 2242/2260/2280) with PCIe Gen3 x4 and SATA3 for SSD
*M.2 Key M 2280(Supported by bracket)
SATA 1 x SATA3.0 (6.0 Gb/s)

Watchdog Timer

Output From Super I/O to drag RESETCON#
Interval 256 Segments 0,1,2....255sec

Power Requirements

Input PWR 12V~19V DC-In Jack
Power On AT/ATX supported
-AT: Direct PWR on as power input ready
-ATX:Press button to PWR on after power input ready

Environment

Operating Temp -20ºC ~ 70ºC
Storage Temp -40° C ~ 85° C
Operating Humidity 5% ~ 90%
Storage Humidity 5% ~ 90%

Others

Longivity Support No

Accessories

Bulk Package 2 x SCREW M2*2,D=5 (13G020302031AK)
1 x NUT M2 H=3.35mm (13G020271020AK)
1 x NUT M2 H=6.5mm (13G0201950B0AK)
1 x COM Cable (14G000000340AK)
1 x SATA Data/Power Cable (14G000104503AK)

The specification is subject to change without notice in advance. The brand and product names are trademarks of their respective companies. Any configuration other than original product specification is not guaranteed.

All data is for information purposes only. The specification is subject to change without notice in advance. Any configuration other than original product specification is not guaranteed. Although all the information contained within this website is carefully checked, no guarantee of correctness is implied or expressed.
Please always double-check the latest version of the product specification of the product manufacturer. Manufacturer Product Website: 4X4-V2000M
Product names, logos, brands, and other trademarks featured or referred are the property of their respective trademark holders. These trademark holders are not affiliated with MCTX Mobile & Embedded Computers GmbH.

OEM System Integration Support

All documents found on this page are subject to change without notification. Always ensure that you work with the latest version.
Datasheet
User Manual
  • Looking for qualified advice on selecting a suitable computing platform for your application?

  • Looking for a partner to swiftly build proof-of-concept prototypes for a new project?

  • We've got the expertise to bring your ideas to life quickly. Feel free to reach out for a non-binding conversation. Let's discuss your requirements and make it happen.

Please note that we offer our services exclusively to Original Equipment Manufacturers. We do not sell to private persons or resellers.
Contact
Fields marked with asterisks (*) are required.
Privacy *